f.mendes wrote:You just have to activate the Timer0 like you have done with Timer1, just the same way.
PicBasic is actually activating the timers, it has shielded us from some of the internal workings of the pic. But using timer0 is not quite as straight forward, for us at least. It can't be set for a 1 second interval, so you have to set it for a shorter version and than count how many times it gets there to calulate the 1 second interval we need. Also we need to be sure picbasic isn't using timer0 for anything or that could cause problems and if we miss any of the counts our timing is out.
The master schematic is correct, but look through the recent posts, there are somethings that will catch you out. Also there are pictures of the assymbled board that should help.
I think that is the correct slave schematic. The slave pic is 12f683, some of the schematics show the wrong pic so check that.