Posted: Wed Oct 17, 2007 9:51 pm
I have just popped out the lower brush tonight to inspect after 190 miles - It has bedded beautifully - This is probably due to the pre-curvature put on by Schunk. They say that the originals are supplied curved to fit the Leroy Somner motor armature. You can see where it has been "rubbed" by the com as it revolves.
So I think they are better than the slotted ones that have to be worn away by the armature before you get full brush contact on the com.
JOhn
So I think they are better than the slotted ones that have to be worn away by the armature before you get full brush contact on the com.
JOhn