Almost done adding values to the diagram, think i might get the digi-key part numbers on also before i have to go to work
After that i will do a print and scan the diagram and upload it
and then i will do cosmetics on the PCB itself and upload pics of that
Old BMS General Thread
Moderators: GregsGarage, retepsnikrep
- retepsnikrep
- Posts: 1387
- Joined: Sat May 26, 2007 4:50 pm
- Location: North Yorkshire England
- Contact:
Boelle. I would place them on top only for ease of visual inspection later and to avoid damaging any with wires that may pass underneath. But it's your board please feel free to do what you think is best.
I'm waiting for my pcb man to get back after bank holiday and hopefully he can work on the multi slave digital board. I'm also on hols from Thursday AM so won't be in regular contact for 2 weeks. But I am hoping to get the boards ordered before I leave so that I have something new to play with on my return!!
I'm waiting for my pcb man to get back after bank holiday and hopefully he can work on the multi slave digital board. I'm also on hols from Thursday AM so won't be in regular contact for 2 weeks. But I am hoping to get the boards ordered before I leave so that I have something new to play with on my return!!
Regards Peter
Two MK1 Honda Insight's. One running 20ah A123 Lithium pack. One 8ah BetterBattery Nimh pack.
One HCH1 Civic Hybrid running 60ah A123 Lithium pack.
Two MK1 Honda Insight's. One running 20ah A123 Lithium pack. One 8ah BetterBattery Nimh pack.
One HCH1 Civic Hybrid running 60ah A123 Lithium pack.
The schematic might be a bit ugly, but the 123 software cant do better, hope it's ok
http://tina-og-bo.dk/schematic.JPG
http://tina-og-bo.dk/slave2.123
http://tina-og-bo.dk/slave2.bom.htm
http://tina-og-bo.dk/schematic.JPG
http://tina-og-bo.dk/slave2.123
http://tina-og-bo.dk/slave2.bom.htm
- retepsnikrep
- Posts: 1387
- Joined: Sat May 26, 2007 4:50 pm
- Location: North Yorkshire England
- Contact:
$2384.24
What currency is this?
Does it include supply and building of 25 digital slaves?
What about the Picaxe chip itself?
I assume this is for an smd board?
It sounds expensive
Can you rotate the board jpg 90deg left and the re-upload it please.
What currency is this?
Does it include supply and building of 25 digital slaves?
What about the Picaxe chip itself?
I assume this is for an smd board?
It sounds expensive
Can you rotate the board jpg 90deg left and the re-upload it please.
Regards Peter
Two MK1 Honda Insight's. One running 20ah A123 Lithium pack. One 8ah BetterBattery Nimh pack.
One HCH1 Civic Hybrid running 60ah A123 Lithium pack.
Two MK1 Honda Insight's. One running 20ah A123 Lithium pack. One 8ah BetterBattery Nimh pack.
One HCH1 Civic Hybrid running 60ah A123 Lithium pack.
retepsnikrep wrote:$2384.24
What currency is this?
us dollar
Does it include supply and building of 25 digital slaves?
Includes 25 boards that will fit on top of a 200ah cell if i had the size correct and includes parts but so far not a finish build board, will ask sunstone about that when i have done the cosmetic stuff for the pcb
What about the Picaxe chip itself?
the picaxe have to be soldered by hand as digikey do not stock it, and sunstone use digikey only as far i know
I assume this is for an smd board?
Yes
It sounds expensive
i think too, why the price for the board and parts are so high i dont know, compared to that i have done all the work myself
Can you rotate the board jpg 90deg left and the re-upload it please.
sure, just a sec Uploaded
http://tina-og-bo.dk/schematic.JPG With old digikey part numbers
http://tina-og-bo.dk/slave3.123
http://tina-og-bo.dk/slave3.bom.htm
http://tina-og-bo.dk/pcb1.JPG whole board
http://tina-og-bo.dk/pcb2.JPG closeup of pcb
http://tina-og-bo.dk/Quote.JPG assembly quote
Price table from 123 software (parts included but not the picaxe):
# of boards -- price -- each
2 -- 302,50 -- 151,25
4 -- 307,20 -- 76,8
6 -- 343,30 -- 57,22
8 -- 379,41 -- 47,43
10 -- 415,51 -- 41,55
-----------------------------------------------------
12 -- 451,61 -- 37,63
14 -- 487,71 -- 34,84
16 -- 523,81 -- 32,74
18 -- 559,91 -- 31,11
20 -- 596,02 -- 29,80
-----------------------------------------------------
25 -- 686,27 -- 27,45
30 -- 776,32 -- 25,88
50 -- 1137,54 -- 22,75
75 -- 1588,81 -- 21,18
100 -- 2040,08 -- 20,40
---------------------------------------------------
200 -- 3845,16 -- 19,23
300 -- 5650,24 -- 18,83
400 -- 7455,32 -- 18,64
500 -- 9260,40 -- 18,52
750 -- 13773,11 -- 18,36
1000 -- 18285,81 -- 18,29
http://tina-og-bo.dk/slave3.123
http://tina-og-bo.dk/slave3.bom.htm
http://tina-og-bo.dk/pcb1.JPG whole board
http://tina-og-bo.dk/pcb2.JPG closeup of pcb
http://tina-og-bo.dk/Quote.JPG assembly quote
Price table from 123 software (parts included but not the picaxe):
# of boards -- price -- each
2 -- 302,50 -- 151,25
4 -- 307,20 -- 76,8
6 -- 343,30 -- 57,22
8 -- 379,41 -- 47,43
10 -- 415,51 -- 41,55
-----------------------------------------------------
12 -- 451,61 -- 37,63
14 -- 487,71 -- 34,84
16 -- 523,81 -- 32,74
18 -- 559,91 -- 31,11
20 -- 596,02 -- 29,80
-----------------------------------------------------
25 -- 686,27 -- 27,45
30 -- 776,32 -- 25,88
50 -- 1137,54 -- 22,75
75 -- 1588,81 -- 21,18
100 -- 2040,08 -- 20,40
---------------------------------------------------
200 -- 3845,16 -- 19,23
300 -- 5650,24 -- 18,83
400 -- 7455,32 -- 18,64
500 -- 9260,40 -- 18,52
750 -- 13773,11 -- 18,36
1000 -- 18285,81 -- 18,29
Last edited by boelle on Mon Jun 01, 2009 6:14 pm, edited 4 times in total.
Who is online
Users browsing this forum: No registered users and 14 guests